The first step in any analysis of how your product will dry in a PDS Pulse Dryer would be to send us a sample of your product. If your feed material has never been spray dried before, send us 100ml of the material, along with the Bench Test Request form, for a no-cost evaluation of the suitability of your material for pulse drying. Generally, any product that can be successfully spray-dried can be pulse-dried, and with a better result.
If the Bench Test results are positive, or if you are already spray-drying your material, we will recommend a Pilot Trial.
In performing Pilot Trials, we normally use 15-20 gallons of your feed material, and we run 4-6 trials in the course of a day. Our goal is to produce pulse-dried powder for your evaluation, and to optimize dryer throughput, yield, and efficiency, in addition to powder quality. We encourage you to attend the trials so you can see our equipment in operation, and give us on-the-spot feedback about the powders. Please contact us to get a custom quotation. Our fee is due at time of service. If you cannot attend the test, you can simply send us the feedstock, and we will run the trial, and return the powder and our report to you for analysis.
We have a complete set of mixing equipment for batch sizes from 3-50 gallons, along with a homogenizer.
Contact us to schedule a test, or visit our Dryer Technologies pages to learn more about the science and benefits of pulse atomization spray drying.
View Demonstrated Expertise